Sale: $69.99 & FREE Shipping. Details
You Save: $30.01 (30%)
Watch imagination come to life with the Professional 3D Pen
Adjustable feed lets you regulate speed & flow for optimal control of material while you’re drawing
Temperature is adjustable in 1 degree increments from 130 to 240 C, for optimal fine-tuning
Large, OLED display lets you monitor temperature of material to help you achieve a wide variety of effects
Kit includes 3 colors of ABS plastic filament A/C adapter and slim, ergonomic touch pen with 1 year limited warranty
MYNT3D Professional 3D Printing Pen
Hold the magic of 3D printing in your hand with the MYNT3D Professional 3D Pen. Now you can use FDM technology in any application varying from drafting and prototyping to spatial learning and three dimensional sculpting. Whether you’re an engineer or an artist, the MYNT3D Pen will take your design projects to greater heights.
Fast, Slow, and Anywhere in Between
One speed isn’t good enough for your car and it’s not good enough for a 3D pen either. With the MYNT3D Pen you can crank up the extrusion speed for larger fill in areas and turn it down slow to create intricate works of art. The stepless design lets you dial in the optimal speed for any task you can throw at it.
Works with Nearly Any 1.75mm Filament Under the Sun
While some competitors make you use proprietary filament, we at MYNT3D believe you should be able to use any thermoplastic you wish. ABS and PLA are a given, but what about wood or bronze infused filaments? If it is 1.75mm and melts between 130-240° C, then it will work in the MYNT3D Pen.
ABS: 210° C
PLA: 175° C
All other plastics: Reduce temperature relative to recommendations for 3D printers.
But wait, there’s more
Ergonomic shape keeps the controls always within reach and let’s you manuever the pen in ways that would be impossible for a larger design.
The MYNT3D Pen is USB powered so that it can be used with battery power banks (with at least 2A output). Take your projects outside or on the go!
A temperature mistake with another pen could send it straight to the garbage. With MYNT3D we’ve got your back with a modular nozzle design that can be replaced in a matter of minutes.
Top customer reviews
5.0 out of 5 starspen is fun to play around with
January 8, 2017
I had been wanting to try one of these pens for a while now. Today we’re snowed in so I got to use this for the first time.
I chose this pen for that it has a door that opens and replaceable tip. I also liked that it could use ABS and PLA. I bought a box of SketchPro PLA filaments to go with it. I knew I did not want to smell plastic while snowed in. It worked great with the PLA also.
This is my first 3D pen.
The temperature goes to 230 C plus a little, which is more than enough for the type of filament I bought.
The PLA worked fine in this pen. The recommended temperature is 190-230 C.
I used the black PLA and made some dollhouse windows. I was aiming for gates but think 3mm type pen would be better for gates.
I pulled the short piece out instead of trying to feed every last inch. I was not sure if it would feed the last piece. The motor backs it out only if it has something to back out. In other words if no filament is in it, motor won’t continue to run.
The seller emailed me and assured me, if I need technical support to contact them.
The directions are brief but the pen is simple and intuitive.
The website sells extra tips and ABS for the pens.
I noticed as I used the roll of black, that it got a little easier to control the pla.
If you are an artist and draw a lot, you will pull up on the pen to look at what you are doing.